Quick Answer: Do Optical Audio Cables Really Make A Difference?

Are optical audio cables better?

Both HDMI and optical pass digital audio from one device to another.

Both are better than analog (the red and white cables).

The biggest difference is that HDMI can pass higher-resolution audio, including the formats found on Blu-ray: Dolby TrueHD and DTS HD Master Audio..

Can I use HDMI and optical audio at the same time?

You can have video from HDMI at the TV’s resolution, and have audio coming from your receiver via optical, which is what I did, or you can have both audio and video going straight to your television, but you can’t have both.

What’s better Dolby or DTS?

Dolby Digital compresses 5.1 digital audio down to a bit rate of 640 kbits/s (kilobits per second) for Blu-ray discs. For DVD discs, it supports a slightly lower bit rate: up to 448 kbits/s. DTS on the other hand, is less compressed and supports higher bit rates of up to 1.5Mb/s (megabits per second).

Can optical convert to HDMI?

This adapter allows you to combine the video signal from a DVI video source with either a Digital Coaxial or Digital Optical Audio output into an HDMI audio/video signal for use with an HDTV or HDMI-equipped AV receiver.

What is the best sound mode for TV?

SamsungSound Mode:Menu → Sound → Sound Mode → Set to StandardSRS TruDialog:Menu → Sound → SRS TruDialog → Set to OffEqualizer:Menu → Sound → Equalizer → Set to Default3D Audio:Menu → Sound → 3D Audio → Set to OffBroadcast Audio Options:Menu → Sound → Broadcast Audio Options → Set to Off5 more rows

Is PCM 5.1 surround sound?

PCM can carry surround sound, but it cannot do so over an optical cable—the optical cable can only carry stereo PCM (using TOSLINK, the home stereo standard). To send surround PCM, you’d need to use an HDMI cable (or alternatively displayport on a PC), which carries both the video and audio signal.

What is PCM sound?

PCM (pulse code modulation) describes a process that’s used to convert analog audio signals (represented by waveforms) into digital audio signals (represented by ones and zeros — much like computer data) with no compression.

Does Netflix use Dolby or DTS?

While the new Netflix audio can match DVDs in terms of audio quality, Blu-ray discs use better audio—like DTS Surround Sound and Dolby TrueHD—which lose a lot less sound information than regular DVDs.

Do expensive audio cables make a difference?

If you have a modest system, investing in expensive cables may not be the best way to spend your money. Cables make a difference, but it’s a smaller difference than upgrading speakers, electronics, or turntable systems. If you already have a really good system, cables are the next logical upgrade step.

Should I use PCM or Dolby Digital?

Distinguished Member. Dolby Digital is compressed so PCM is better. Dolby True HD, DTS HD MA, Atmos and DTS X are also lossless, so should be similar quality to PCM. If the source audio is stereo, it should only be coming from your front left and right speakers unless you use an up mixer.

Is PCM Dolby Digital?

Pulse-Code Modulation (PCM) and the Dolby Digital® technology refer to different types of digital audio recordings. PCM is the conventional method for converting analog audio into digital audio. … Dolby Digital® technology uses a 5.1 or six channel format.

Do I need both HDMI and optical cables?

HDMI cables can carry both audio and video. It eliminates the need for another cable. On the contrary, when you opt for an optical cable, you will need a second type of cable to transmit your video signal. The total cost of the two cables may end up being more than one HDMI cable.

Is optical audio better than Bluetooth?

The bandwidth is for optical is way better than what BT offers. If there is a difference, it may be one of two things: personal preference built up over years of listening to lower quality sound or post processing and amplification done by the device in order to “boost” the signal to make it sound better.

Why are speaker cables so expensive?

Cables inherently have a little inductance and capacitance, but since the ultimate goal is to have all frequencies arrive at the speaker at the same time, more expensive cables go the extra mile and take these factors into account. – Conductor material. The purer the conductor, the more it costs.

Is optical audio better than aux?

Higher quality aux cables can also help as they’re better shielded. Optical isn’t foolproof either. … In terms of value for money, aux cables are usually cheaper, more versatile, and most commonly found on modern devices than their digital counterpart.

Does cable length affect sound quality?

Due to the additional signal losses longer runs impose, the better the cable is at “protecting” the signal, the better will be the sound. … a shorter length of the same cable, in most cases, the 1.5M cable sounded a bit better the shorter cable.

What is the best cable for speakers?

Thick wire (12 or 14 gauge) is recommended for long wire runs, high power applications, and low-impedance speakers (4 or 6 ohms). For relatively short runs (less than 50 feet) to 8 ohm speakers, 16 gauge wire will usually do just fine. It’s cost-effective and easy to work with.

What is better DTS Neo 2.5 or Dolby Digital?

The difference between Dolby Digital and DTS NEO 2.5 is in the compression rate. While Dolby Digital´s compression rate is higher, DTS has a lower compression. Therefore, DTS NEO 2.5 has more fidelity to the original source and a higher bitrate.

What is PCM in study?

PCM stands for a group of subjects. PCM means – physics, chemistry and mathematics. Students taking PCM group of subjects can apply for engineering and similar professional courses during their degree levels.

Which surround sound mode is best?

If you get a choice of either Dolby Digital surround or DTS, we recommend using DTS. This surround format for either 5 or 7 channels is currently only available on Blu-ray discs. It is the same quality as CD. As such, it offers best surround audio quality currently available.